Wire
I have the size that can support a pearl, the consecutive tuple of the precious stone necklace.
MCNB36C
| 0.36mm/100M |
| Wire 7 X 7 (49) |
| Transparence coating |
| 8,200 yen |
| It is the Wire which is flexible by a twist in 49 thin Wire. Raised it by a group in Thread; is finished. |
MCNB45C
| 0.45mm/200M |
| Wire 7 X 7 (49) |
| Transparence coating |
| 16,000 yen |
| It is 0.36mm, coating 0.45mm finish by 49 Wire twists. |
Wire 7 X 7
| I coat it, and it is taken a plastic step by the Wire which twisted 49 Wire. There are flexibility such as the Thread and tough strength. |
MBNE32C
| 0.32mm/1000M |
| Wire 1 X 7 |
| Transparence coating |
| 8,950 yen |
| On a necklace of the 3~5mm size. |
MBNE36C
| 0.36mm/1000M |
| Wire 1 X 7 |
| Transparence coating |
| 8,950 yen |
| On a necklace of the 6-8mm size. |
MBNE40C
| 0.4mm/1000M |
| Wire 1 X 7 |
| Transparence coating |
| 8,950 yen |
| On a necklace of the 6-10mm size. |
MBNE40W
| 0.4mm/1000M |
| Wire 1 X 7 |
| White coating |
| 8,950 yen |
| On a necklace of the 6~10mm size. |
MBNE60C
| 0.6mm/1000M |
| Wire 1 X 7 |
Transparence coating |
| 8,950 yen |
| It supports the large drop of South Seas Pearl. |
MCNE24C
| 0.24mm/100M |
| Wire 1 X 7 |
| Transparence coating |
| 1,050 yen |
| It can support a precious stone necklace opened with approximately 0.3mm in a hole. |
MCNE32C
| 0.32mm/100M |
| Wire 1 X 7 |
| Transparence coating |
| ￥980 |
In the consecutive group of the 3-5mm size, I go along two as a lapel to hole diameter 0.7mm |
MCNE36C
| 0.36mm/100M |
| Wire 1 X 7 |
| Transparence coating |
| ￥980 |
They fold 6mm size into hole diameter 0.7mm back in the consecutive group of improving, and two do not carry |
MCNE40C
| 0.4mm/100M |
| Wire 1 X 7 |
| Transparence coating |
| ￥980 |
They fold 6mm size into hole diameter 0.7mm back in the consecutive group of improving, and two do not carry |
MCNE45C
| 0.45mm/100M |
| Wire 1 X 7 |
| Transparence coating |
| ￥800 |
In the consecutive group of 9mmUP, two do not carry with a lapel to hole diameter 0.7mm |
MCNE60C
| 0.6mm/100M |
| Wire 1 X 7 |
| Transparence coating |
| 1,300 yen |
In the South Seas Pearl consecutive group 12mm or more, two do not go with a lapel to hole diameter 0.7mm |
MCNE24W
| 0.24mm/100M |
| Wire 1 X 7 |
| White coating |
| 1,050 yen |
| It can support a precious stone necklace opened with approximately 0.3mm in a hole. |
MCNE32W
| 0.32mm/100M |
| Wire 1 X 7 |
| White coating |
| ￥980 |
| In the consecutive group of the 3-5mm size, I go along two as a lapel to hole diameter 0.7mm |
MCNE36W
| 0.36mm/100M |
| Wire 1 X 7 |
| White coating |
| ￥980 |
They fold 6mm size into hole diameter 0.7mm back in the consecutive group of improving, and two do not carry |
MCNE40W
| 0.4mm/100M |
| Wire 1 X 7 |
| White coating |
| ￥980 |
They fold 6mm size into hole diameter 0.7mm back in the consecutive group of improving, and two do not carry |
MCNE40B
| 0.4mm/100M |
| Wire 1 X 7 |
| Black coating |
| ￥980 |
They fold 6mm size into hole diameter 0.7mm back in the consecutive group of improving, and two do not carry |
Wire 1 X 7
| I coat it, and it is taken a plastic step by the Wire which twisted seven Wire in one. |