Pearl Drill through machine
Pearl Drill through machine 100Volt
| E0221 | Pearl Drill through machine 100Volt YS-100 | 96,500 yen |
| Size | 105 X 280 X 145㎜ | |
| Number of revolutions | 50Hz/7000rpm 60Hz/6500rpm | |
| Weight | 4.9 kg | |
| Motor rating | 30 minutes | |
| Accessories | Drill chuck steering wheel, powder saucer, slide steering wheel |
※The pearl zipper becomes sold separately.
I can sandwich pearl zipper No20 between the baroque Pearl of up to 30mm by wearing.
I can store 12 sets of pearl zippers.
Pearl zipper
| F152 | Pearl zipper No. 2 | (less than 2mm~3mm) | Class 1,500/1 yen |
| F153 | Pearl zipper No. 3 | (less than 3mm~4mm) | Class 1,500/1 yen |
| F154 | Pearl zipper No. 4 | (less than 4mm~5mm) | Class 1,500/1 yen |
| F155 | Pearl zipper No. 5 | (less than 5mm~6mm) | Class 1,500/1 yen |
| F156 | Pearl zipper No. 6 | (less than 6mm~7mm) | Class 1,500/1 yen |
| F157 | Pearl zipper No. 7 | (less than 7mm~8mm) | Class 1,500/1 yen |
| F158 | Pearl zipper No. 8 | (less than 8mm~9mm) | Class 1,500/1 yen |
| F159 | Pearl zipper No. 9 | (less than 9mm~10mm) | Class 1,500/1 yen |
| F160 | Pearl zipper No. 10 | (less than 10mm~11mm) | Class 2,200/1 yen |
| F161 | Pearl zipper No. 11 | (less than 11mm~12mm) | Class 2,200/1 yen |
| F162 | Pearl zipper No. 12 | (less than 12mm~13mm) | Class 2,300/1 yen |
| F163 | Pearl zipper No. 13 | (less than 13mm~14mm) | Class 2,300/1 yen |
| F164 | Pearl zipper No. 14 | (less than 14mm~15mm) | Class 2,230/1 yen |
| F165 | Pearl zipper No. 15 | (less than 15mm~16mm) | Class 2,300/1 yen |
| F166 | Pearl zipper No. 16 | (less than 16mm~17mm) | Class 2,300/1 yen |
| F167 | Pearl zipper No. 17 | (less than 17mm~18mm) | Class 3,300/1 yen |
| F168 | Pearl zipper No. 18 | (less than 18mm~19mm) | Class 3,300/1 yen |
| F169 | Pearl zipper No. 19 | (less than 19mm~20mm) | Class 3,400/1 yen |
| F170 | Pearl zipper No. 20 | (less than 20mm~21mm) | Class 3,400/1 yen |
A pearl zipper (with a cushion) is a pearl zipper for exclusive use of the baroque Pearl.
I can sandwich the baroque Pearl in rubber becoming the cushion without damaging it.
Pearl zipper (with a cushion)
| F150C1 | Pearl zipper (with a cushion) | (4mm~6mm) | Class 2,250/1 yen |
| F150C2 | Pearl zipper (with a cushion) | (7mm~9mm) | Class 2,250/1 yen |
| F150C3 | Pearl zipper (with a cushion) | (10mm~18mm) | Class 2,850/1 yen |
Carbon Drill Bits (both blades)
I polish a Carbon Drill Bits triangle
G101 | Carbon Drill Bits (both blades) 0.6 φ *50mm | 690/1 yen book | ※There is a lot price |
G102 G103 | Carbon Drill Bits (both blades) 0.7 φ *50mm Carbon Drill Bits (both blades) 0.8 φ *50mm | 630/1 yen book 630/1 yen book | ※There is a lot price ※There is a lot price |
| G104 | Carbon Drill Bits (both blades) 0.9 φ *50mm | 630/1 yen book | ※There is a lot price |
| G105 | Carbon Drill Bits (both blades) 1.0 φ *50mm | 630/1 yen book | ※There is a lot price |
| G106 | Carbon Drill Bits (both blades) 1.1 φ *50mm | 820/1 yen book | ※There is a lot price |
| G107 | Carbon Drill Bits (both blades) 1.2 φ *50mm | 820/1 yen book | ※There is a lot price |
| G108 | Carbon Drill Bits (both blades) 1.3 φ *50mm | 1,420/1 yen book | ※There is a lot price |
| G109 | Carbon Drill Bits (both blades) 1.4 φ *50mm | 1,420/1 yen book | ※There is a lot price |
| G110 | Carbon Drill Bits (both blades) 1.5 φ *50mm | 1,420/1 yen book | ※There is a lot price |
| G111 | Carbon Drill Bits (both blades) 1.6 φ *50mm | 1,890/1 yen book | ※There is a lot price |
| G112 | Carbon Drill Bits (both blades) 1.7 φ *50mm | 1,890/1 yen book | ※There is a lot price |
| G113 | Carbon Drill Bits (both blades) 1.8 φ *50mm | 2,100/1 yen book | ※There is a lot price |
| G114 | Carbon Drill Bits (both blades) 1.9 φ *50mm | 2,100/1 yen book | ※There is a lot price |
| G115 | Carbon Drill Bits (both blades) 2.0 φ *50mm | 2,100/1 yen book | ※There is a lot price |
I polish a Steel Drill Bits triangle (Heiss steel)
G021 | Steel Drill Bits (both blades) 0.6 φ *50mm | 1,800/10 yen Motoiri |
G022 | Steel Drill Bits (both blades) 0.7 φ *50mm | 1,800/10 yen Motoiri |
G023 | Steel Drill Bits (both blades) 0.8 φ *50mm | 1,800/10 yen Motoiri |
G024 | Steel Drill Bits (both blades) 0.9 φ *50mm | 1,800/10 yen Motoiri |
G025 | Steel Drill Bits (both blades) 1.0 φ *50mm | 1,800/10 yen Motoiri |
G026 | Steel Drill Bits (both blades) 1.1 φ *50mm | 1,100/5 yen Motoiri |
G027 | Steel Drill Bits (both blades) 1.2 φ *50mm | 1,100/5 yen Motoiri |
G028 | Steel Drill Bits (both blades) 1.3 φ *50mm | 1,500/5 yen Motoiri |
G029 | Steel Drill Bits (both blades) 1.4 φ *50mm | 1,500/5 yen Motoiri |
G030 | Steel Drill Bits (both blades) 1.5 φ *50mm | 1,500/5 yen Motoiri |